商品詳細
画像クリックで拡大します
Terasic DE1-SoC
DE1-SoC -Altera Cyclone V SoC開発キット-
■ 概要
・Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
・1GB DDR3 and 64MB SDRAM
・VGA Out, Video-In, UART-to-USB, USB Host x2, Micro SD Card Socket, 1Gbps Ethernet, and GPIO Headers
■ 主な仕様
FPGA Device
・Cyclone V SoC 5CSEMA5F31C6 Device
・Dual-core ARM Cortex-A9 (HPS)
・85K Programmable Logic Elements
・4,450 Kbits embedded memory
・6 Fractional PLLs
・2 Hard Memory Controllers
Configuration and Debug
・Serial Configuration device – EPCS128 on FPGA
・On-Board USB Blaster II (Normal type B USB connector)
Memory Device
・64MB (32Mx16) SDRAM on FPGA
・1GB (2x256Mx16) DDR3 SDRAM on HPS
・Micro SD Card Socket on HPS
Communication
・Two Port USB 2.0 Host (ULPI interface with USB type A connector)
・USB to UART (micro USB type B connector)
・10/100/1000 Ethernet
・PS/2 mouse/keyboard
・IR Emitter/Receiver
Connectors
・Two 40-pin Expansion Headers (voltage levels: 3.3V)
・One 10-pin ADC Input Header
・One LTC connector (One Serial Peripheral Interface (SPI) Master ,one I2C and one GPIO interface )
Display
・24-bit VGA DAC
Audio
・24-bit CODEC, Line-in, line-out, and microphone-in jacks
Video Input
・TV Decoder (NTSC/PAL/SECAM) and TV-in connector
ADC
・Fast throughput rate: 1 MSPS
・Channel number: 8
・Resolution: 12 bits
・Analog input range : 0 ~ 2.5 V or 0 ~ 5V as selected via the RANGE bit in the control register
Switches, Buttons and Indicators
・4 User Keys (FPGA x4)
・10 User switches (FPGA x10)
・11 User LEDs (FPGA x10 ; HPS x 1)
・2 HPS Reset Buttons (HPS_RST_n and HPS_WARM_RST_n)
・Six 7-segment displays
Sensors
・G-Sensor on HPS
Power
・12V DC input
【商品内容】
●DE1-SoC Board
●DE1-SoCクイックスタートガイド
●USBケーブル(A-B)
●USBケーブル(A-miniB)
●ACアダプター(12V)
・Cyclone V SoC with Dual-core ARM Cortex-A9 (HPS)
・1GB DDR3 and 64MB SDRAM
・VGA Out, Video-In, UART-to-USB, USB Host x2, Micro SD Card Socket, 1Gbps Ethernet, and GPIO Headers
■ 主な仕様
FPGA Device
・Cyclone V SoC 5CSEMA5F31C6 Device
・Dual-core ARM Cortex-A9 (HPS)
・85K Programmable Logic Elements
・4,450 Kbits embedded memory
・6 Fractional PLLs
・2 Hard Memory Controllers
Configuration and Debug
・Serial Configuration device – EPCS128 on FPGA
・On-Board USB Blaster II (Normal type B USB connector)
Memory Device
・64MB (32Mx16) SDRAM on FPGA
・1GB (2x256Mx16) DDR3 SDRAM on HPS
・Micro SD Card Socket on HPS
Communication
・Two Port USB 2.0 Host (ULPI interface with USB type A connector)
・USB to UART (micro USB type B connector)
・10/100/1000 Ethernet
・PS/2 mouse/keyboard
・IR Emitter/Receiver
Connectors
・Two 40-pin Expansion Headers (voltage levels: 3.3V)
・One 10-pin ADC Input Header
・One LTC connector (One Serial Peripheral Interface (SPI) Master ,one I2C and one GPIO interface )
Display
・24-bit VGA DAC
Audio
・24-bit CODEC, Line-in, line-out, and microphone-in jacks
Video Input
・TV Decoder (NTSC/PAL/SECAM) and TV-in connector
ADC
・Fast throughput rate: 1 MSPS
・Channel number: 8
・Resolution: 12 bits
・Analog input range : 0 ~ 2.5 V or 0 ~ 5V as selected via the RANGE bit in the control register
Switches, Buttons and Indicators
・4 User Keys (FPGA x4)
・10 User switches (FPGA x10)
・11 User LEDs (FPGA x10 ; HPS x 1)
・2 HPS Reset Buttons (HPS_RST_n and HPS_WARM_RST_n)
・Six 7-segment displays
Sensors
・G-Sensor on HPS
Power
・12V DC input
【商品内容】
●DE1-SoC Board
●DE1-SoCクイックスタートガイド
●USBケーブル(A-B)
●USBケーブル(A-miniB)
●ACアダプター(12V)
※外装パッケージデザインは予告無く変更となる場合があります。
【欠品中】秋葉原本店取扱フロア:1階
【関連情報】 |
メーカーサイト |
管理コード:EEHD-4RWB